Hospital Grade Decontaminant 5L Concentrate CLEARANCE

Makes up 156L. ActiveEco Decontaminant is an anti-microbial decontaminant for use in heavy-duty restoration situations where moulds, bacteria, viruses, yeasts and spores are prevalent because of flooding, body fluids or organic waste.

The Core biocidal activity in the decontaminant is derived from a synergistic combination of two powerful biocides and specific potentiator chemistry which can effectively destroy a wide range of colour-causing bacteria, micro-organisms, viruses and mould.

This powerful biocidal blend is carried rapidly and deeply into the affected area with a dynamic wetting agent which enables the biocide to penetrate substantially further into porous substrates, fabrics and fibres than traditional disinfectants. The Decontaminant is active against gram-positive and negative bacteria, moulds, spores, and enveloped and non-enveloped (lipid and non-lipid) viruses at suggested dilution rates.

DILUTION RATE: Add 32ml/L of water (1:32) for positive disinfection/decontamination.

APPLICATION!

1. Spray down the affected area with the Decontaminant Solution
2. Remove & clean away all wet & dry debris
3. Apply ActiveEco Decontaminant Solution to the affected area by means of a spray, wet fog, mop or cloth
4. Agitate briefly, where possible into porous substrates
5. Allow a minimum of 10 minutes of dwell time
6. Rinse thoroughly with clean water