Brahma Solenoid Valve for Gas, E6GxS10x0.5xGFD 240V, 50 or 60Hz CLEARANCE

This series of solenoid valves are of normally closed type, suitable for civil and industrial applications, supplied with alternate or direct current. These valves are divided into two groups: with 8mm or 10mm orifice.

Gas valves, marked with “S” or “L” after type reference, have coil operating in direct current, which permitted to make its actions as silent as possible. There is the possibility to have valves provided with inlet pressure plug or outlet pressure plug (excluding G1/4” connection ones) and, 10mm orifice only, valves equipped with hydraulic lag group, which permits slow opening; in this case it is also possible to have a quick and adjustable opening initial flow.

Gas valves of this series, conforming to EN161, have a CE type Certificate (CE Reg. N° 63AQ0626) in accordance to European Directives 90/396 and 93/68. 

Installation

Respect the applicable national and European standards (e.g. EN60335-1) regarding electrical safety.

1. Assemble the valve to the installation so that the arrow on the valve body has the same direction as the fuel flow.
2. During the assembly of the valve to the installation piping, avoid twisting on the sheath and always use an
   hexagonal key to be fitted to the valve body.
3. Make sure that no foreign matters have entered the valve body.
4. Make sure that the max. fuel input pressure never exceeds the value appearing on the label.