50L Laboratory Incubator, Benchtop

Our Benchtop Incubators are manufactured in Australia with a stainless-steel chamber. To extend the unit’s longevity, the exteriors are epoxy powder-coated mild steel for minimal maintenance.

Wide Temperature Range

Each incubator is fitted with a magnetic seal, allowing operation at temperatures up to 80°C. Refrigerated models are available with two levels of cooling: standard cooling down to 4°C, or freezing down to -20°C. The engineers have refined pulsed hot-gas bypass technology in refrigeration control systems to provide exceptional accuracy across a wide temperature range.

Micro-Digital Control

Fitted with advanced micro-digital control systems, these incubators provide consistent control stability over time. The PID controller’s auto-tuning feature ensures that each incubator always operates at optimal settings, regardless of the chamber size.

The controller includes a configurable alarm system, which can be set for an absolute maximum or deviation alarm. In the unlikely event of a control system failure, an independent mechanical thermostat will trigger the alarm and deactivate the heating element, safeguarding the contents of the chamber.

Remote Control, Data-Logging & Programmability

The standard incubator can be connected to a remote PC via an RS 485 interface, while the data-logging software enables temperatures to be recorded and displayed graphically on the PC. Several incubators can be connected on a simple two-wire link and remotely monitored from a single PC.

For full programmability, our engineers have developed a sophisticated setpoint programmable controller. With the ability to store up to 50 programmed temperature profiles and 500 segments, the incubators enable temperature profiles to be preprogrammed, tested, and then downloaded to the controller via a remote PC.

Features

• Durable Epoxy Powder Coated Mild Steel Exterior
• Advanced Micro-Digital Control for Consistent Performance
• Remote Monitoring & Data Logging Via RS 485 Interface
• Wide Temperature Range of (Ambient + 7°C) to 80°C
• Configurable Alarm System for Enhanced Protection
• Auto-Tuning PID Controller for Optimal Settings
• Serial Numbers for Regulatory Compliance
• Manufactured In Australia for Quality